Showing 1–16 of 64 results
-
1000-FS Circular Breaking Saw
Add to Cart -
1000F Circular Breaking Saw
Add to Cart -
1C Head Only Electric Stunner
Add to Cart -
1J Head Only Electric Stunner
Add to Cart -
30CL-3 Sheep & Goat Horn Cutter
Add to Cart -
404 (electric), 424 (pneumatic) – Reciprocating Breaking Saw
Add to Cart -
423-17 Brisket Scissors
Add to Cart -
425-16 Jowl Cutter
Add to Cart -
425-20 Sheep Hock Cutter
Add to Cart -
444 (electric), 464 (pneumatic) – Reciprocating Breaking Saw
Add to Cart -
525-1 Sheep Hock & Tongue Bone Cutter
Add to Cart -
AHC-2 Automated Hock Saw
Add to Cart -
AHD-1 Automatic Head Dropper
Add to Cart -
AST- 107-112 USSS Stunner Tester
Add to Cart -
AST-106 PAS Tester
Add to Cart -
BA BOOM STUNNER
Add to Cart
Stunning/Knocking
BA BOOM STUNNER
Cost effective version of Jarvis Stunners. Safe method of stunning cattle, pigs, sheep and other livestock. Powerful penetration. Easy to handle with one hand operation. Able to handle a wide...
HPS-1
Euthanasia stunner, non-penetrating model HPS-1. Used with either CO2 cylinder or air pressure for small livestock. – turkeys – piglets (up to 13.6kg) – rabbits – ostriches – fish –...
USC-1 Stunning Control System
For use with Jarvis’ full range of USSS knocking guns, the USC-1 Stunning Control System has been developed in partnership with pneumatic specialists SMC and is invaluable for anyone having...
JASS-1 Sheep & Small Stock Stunner
THe JASS-1 Sheep and Small Stock stunner has been specifically built to comply with EU Export Regulations that came into effect this year.
1C Head Only Electric Stunner
The Jarvis Model 1C applies constant pressure between electrode and animal – ensuring high quality stunning every time. Easy and comfortable operator handling – pneumatic power reduces the physical effects...
AST- 107-112 USSS Stunner Tester
Jarvis manufactures Model AST 107 through AST 112 stunner testers to test out our line of Model USSS penetrating and non penetrating stunners.
1J Head Only Electric Stunner
The Jarvis Model M1J Stunner for head only humane Halal type stunning. Easy and comfortable operator handling for head-to-back “Full Kill” stunning Lightweight, tool weights less than 4 pounds (1.7...
PAS type C – Non-Penetrating Concussion (.22R & .25R)
Renders stunned animal insensible to pain, without penetrating the skull Low cost stunning of larger sized animals One shot humane stunning procedure Standard safety lock for added operator protection Positive...
PAS type C – Penetrating – .22R
Low cost stunning of cattle, hogs, sows, sheep and other livestock Designed to withstand demanding stunning requirements Powerful penetration; easy to handle with one hand operation Easy and quick tool...
PAS type C – Penetrating – .25R
Trigger firing by either using palm or fingers Simple to operate for high slaughter capacity Low operating cost Positive retraction of bolt after firing and stunning
PAS type C – Penetrating – .25R Cow & Bull Stunner
Compression contact firing upon impacting animal’s skull Designed to withstand demanding stunning requirements Different power loads available for every application Powerful penetration; easy to handle with one hand operation Standard...
PAS type C – Penetrating – .25R Clamp Retained
Higher velocity bolt action for faster processing line operations Ideal for stunning larger sized cattle, hogs, sows and sheep Wide range of cartridges available for different applications Comfortable grip handle...
PAS type C – Penetrating – .25R Clamp Retained Super Heavy Duty
Low cost stunning of large sized bulls Designed for stunning requirements associated with larger animals Standard safety lock for added operator protection Easy and quick stunner cleaning. Positive retraction of...
PAS type P – Non-Penetrating Concussion (.22R & .25R)
Designed for stunning both animals and poultry Renders stunned animals and poultry insensible to pain, without penetrating the skull Comfortable, ergonomically designed handle Low cost stunning of animals and poultry...
PAS type P – Penetrating – .22R
Humane, easy to use, trigger operated handle gripped stunner Comfortable, ergonomically designed handle for maximum comfort Wide variety of applications, from small to larger sized livestock Different types of cartridges...
PAS type P – Penetrating – .25R
Standard bolt model Automatic bolt return Heavy duty handle gripped stunner for sows, boars , hogs and larger cattle Conventional handle style and trigger operation
PAS type P – Penetrating – .25R Long Length
Longer length bolt for deeper skull penetration Diverse applications, from smaller to larger sized livestock Renders animal insensible to pain before slaughter Simple to use, operate, and maintain Well built,...
PAS type C – Penetrating – .22R & .25R – with Handle
Long handle attached for better reaching animals in stunning pens Compressing contact firing upon impacting animal’s skull Different power loads available for every application Standard safety lock for added operator...
AST-106 PAS Tester
The Jarvis Model AST 106 Tester – for Jarvis stunners PAS Type C and Type P bolt speed measurements. Fast, accurate testing of Jarvis power load stunners. Easy to use...
Stunning/Knocking
HPS-1
Euthanasia stunner, non-penetrating model HPS-1. Used with either CO2 cylinder or air pressure for small livestock. – turkeys – piglets (up to 13.6kg) – rabbits – ostriches – fish –...
JASS-1 Sheep & Small Stock Stunner
THe JASS-1 Sheep and Small Stock stunner has been specifically built to comply with EU Export Regulations that came into effect this year.
1C Head Only Electric Stunner
The Jarvis Model 1C applies constant pressure between electrode and animal – ensuring high quality stunning every time. Easy and comfortable operator handling – pneumatic power reduces the physical effects...
1J Head Only Electric Stunner
The Jarvis Model M1J Stunner for head only humane Halal type stunning. Easy and comfortable operator handling for head-to-back “Full Kill” stunning Lightweight, tool weights less than 4 pounds (1.7...
Cylindrical PAS
PAS type C – Non-Penetrating Concussion (.22R & .25R)
Renders stunned animal insensible to pain, without penetrating the skull Low cost stunning of larger sized animals One shot humane stunning procedure Standard safety lock for added operator protection Positive...
PAS type C – Penetrating – .22R
Low cost stunning of cattle, hogs, sows, sheep and other livestock Designed to withstand demanding stunning requirements Powerful penetration; easy to handle with one hand operation Easy and quick tool...
PAS type C – Penetrating – .25R
Trigger firing by either using palm or fingers Simple to operate for high slaughter capacity Low operating cost Positive retraction of bolt after firing and stunning
PAS type C – Penetrating – .25R Cow & Bull Stunner
Compression contact firing upon impacting animal’s skull Designed to withstand demanding stunning requirements Different power loads available for every application Powerful penetration; easy to handle with one hand operation Standard...
PAS type C – Penetrating – .25R Clamp Retained
Higher velocity bolt action for faster processing line operations Ideal for stunning larger sized cattle, hogs, sows and sheep Wide range of cartridges available for different applications Comfortable grip handle...
PAS type C – Penetrating – .25R Clamp Retained Super Heavy Duty
Low cost stunning of large sized bulls Designed for stunning requirements associated with larger animals Standard safety lock for added operator protection Easy and quick stunner cleaning. Positive retraction of...
AST-106 PAS Tester
The Jarvis Model AST 106 Tester – for Jarvis stunners PAS Type C and Type P bolt speed measurements. Fast, accurate testing of Jarvis power load stunners. Easy to use...
Pistol PAS
PAS type P – Non-Penetrating Concussion (.22R & .25R)
Designed for stunning both animals and poultry Renders stunned animals and poultry insensible to pain, without penetrating the skull Comfortable, ergonomically designed handle Low cost stunning of animals and poultry...
PAS type P – Penetrating – .22R
Humane, easy to use, trigger operated handle gripped stunner Comfortable, ergonomically designed handle for maximum comfort Wide variety of applications, from small to larger sized livestock Different types of cartridges...
PAS type P – Penetrating – .25R
Standard bolt model Automatic bolt return Heavy duty handle gripped stunner for sows, boars , hogs and larger cattle Conventional handle style and trigger operation
PAS type P – Penetrating – .25R Long Length
Longer length bolt for deeper skull penetration Diverse applications, from smaller to larger sized livestock Renders animal insensible to pain before slaughter Simple to use, operate, and maintain Well built,...
AST-106 PAS Tester
The Jarvis Model AST 106 Tester – for Jarvis stunners PAS Type C and Type P bolt speed measurements. Fast, accurate testing of Jarvis power load stunners. Easy to use...
Stick Cylindrical PAS
BA BOOM STUNNER
Cost effective version of Jarvis Stunners. Safe method of stunning cattle, pigs, sheep and other livestock. Powerful penetration. Easy to handle with one hand operation. Able to handle a wide...
PAS type C – Penetrating – .22R & .25R – with Handle
Long handle attached for better reaching animals in stunning pens Compressing contact firing upon impacting animal’s skull Different power loads available for every application Standard safety lock for added operator...
AST-106 PAS Tester
The Jarvis Model AST 106 Tester – for Jarvis stunners PAS Type C and Type P bolt speed measurements. Fast, accurate testing of Jarvis power load stunners. Easy to use...
Head/Horns
AHD-1 Automatic Head Dropper
Long service life and low maintenance costs makes the AHD-1 economical to own and operate. Capable of handling 10 carcasses per minute / 600 per hour. Solid stainless steel construction....
Hocks
425-16 Jowl Cutter
The 425-16 is best suited for sheep hock cutting before fleece removal. It is also suitable for beef tail removal and hog hock cutting. Compact for easy maneuverability; robust for...
525-1 Sheep Hock & Tongue Bone Cutter
The 525-1 and 525-TB are best suited for sheep hock and tongue bone cutting. The Model 525-1 is also suitable for beef tail removal and poultry neck cutting. Compact for...
30CL-3 Sheep & Goat Horn Cutter
The Jarvis Model 30CL-3 – hydraulically powered horn cutter for sheep, goats and beef nubs. The 30CL-3 is specifically designed for high production removal of sheep and goat horns. The...
425-20 Sheep Hock Cutter
The 425-20 is best suited for sheep hock cutting before fleece removal. It is also suitable for beef tail removal and hog hock cutting. Specially designed grabber mechanism holds onto...
AHC-2 Automated Hock Saw
Twin cutters provide maximum efficiency, up to 10 sheep per minute, or 600 per hour. Hydraulically adjustable, cut height control feature – for optimal yields. Solid stainless steel construction. Full...
Dehiding
JCIIIA Dehider
The Jarvis Model JC IIIA – pneumatically powered dehider. The number one skinning tool worldwide for cattle, veal, hogs and sheep. Highest possible hide quality – skins perfectly; no cuts,...
JCIVA Dehider
The Jarvis Model JC IVA – pneumatically powered dehider. Constant torque air motor. Speed does not fluctuate due to air pressure change. Dynamically balanced drive mechanism for low vibration and...
BR-5 Dehider Blade Reconditioner
The Jarvis Model BR-5 / BR-5A / BR-5B and BR-5D – for perfect dehider blade sharpening. Sharpens 100 mm (BR-5), 110 mm (BR-5A), 90 mm (BR-5B) or 100 mm and...
Carcass Vacuum Systems
CV-1 Steam Vacuum System
The CV-1 is specifically designed for pathogen reduction and the spinal cord removal on the carcasses of beef, pork and lamb. Increases shelf-life by reducing the amount of bacteria found...
Brisket
423-17 Brisket Scissors
The 423-17 cuts sheep briskets cleanly and effortlessly – suitable for all size kills. Light weight and short frame make the 423-17 easy to use and comfortable to operate. Dual...
SPC-165 Brisket Opener
The SPC 140, with a 1.5 in (38 mm) cutting depth, or SPC 165 with a 2 in (51 mm) cutting depth, are ideally suited for: Beef: Breaking forequarters and...
HBS-2E Hog Brisket Saw – Electric
The HBS-2E with a 3 inch (76 mm) cutting depth cuts through hog briskets quickly and accurately. Sealed 2.25 hp electric motor for ultimate performance Short overall length and specially...
Fabrication/Breaking
SPC-141 Circular Breaking Saw – Pneumatic
The SPC 141 is ideally suited for opening up mis-split spinal cord cavities in beef. Lightweight and flexible – allows operators to work single handed, both hanging and on the...
SHC-140 & SHC-165 Circular Breaking Saw
The right or left handed SHC-140, with a 1.5 in (38 mm) cutting depth, or SHC-165 with a 2 in (5 mm) cutting depth are ideally suited for: Beef: Breaking...
SHC-205 Circular Breaking Saw
The right or left handed SHC 205, with a 2.8 in (71 mm) cutting depth, is ideally suited for: Beef: Breaking forequarters and beef plates, also hot and cold ribbing....
1000-FS Circular Breaking Saw
The 1000-FS, with a 3 to 6.0 in (76 to 152 mm) depth of cut, is ideally suited for: Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins and aitch...
HBS-1000 Circular Breaking Saw
The HBS 1000, with a 4.75 inch (121 mm) depth of cut, is ideally suited for: Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins and aitch bones. Pork: chine...
SPC-100 Circular Breaking Saw
The SPC 100, with a maximum 0.75 inch (19 mm) cutting depth, is ideally suited for beef and pork scribing. Lightweight and flexible – allows operators to use the tool...
SPC-140 & SPC-165 Circular Breaking Saw
The SPC 140, with a 1.5 in (38 mm) cutting depth, or SPC 165 with a 2 in (51 mm) cutting depth, are ideally suited for: Beef: Breaking forequarters and...
DRS-270 Dual Bladed Ribbing Saw
The Model DRS-270 with two 9 inch (229 mm) blades and a full 2 hp motor for easy, quick and precise beef rib cutting. Lightweight, stainless steel construction – only...
1000F Circular Breaking Saw
The 1000F with a 3 in (76 mm) depth of cut, is ideally suited for: Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins and aitch bones. Large depth of...
MCS-260 Circular Breaking Saw & Dehorner
The Jarvis Model MCS 260 — multi-purpose pneumatically powered breaking saw. The MCS 260 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of...
MCS-300 Circular Breaking Saw
The MCS 300 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of cut is ideally suited for primal cutting of: beef: forequarters, chucks,...
404 (electric), 424 (pneumatic) – Reciprocating Breaking Saw
The Model 404 (electric) and 424 (pneumatic) are lightweight saws suitable for production breaking and general purpose use in locker plants. Lightweight – the Model 404 is 9.8 lbs (4.5...
444 (electric), 464 (pneumatic) – Reciprocating Breaking Saw
The Model 444 (electric) and 464 (pneumatic) are lightweight saws suitable for production breaking and general purpose use in locker plants. Lightweight – the Model 444 is 23 lbs (10.5...
SER-04 – Reciprocating Breaking Saw
Jarvis service technicians are available to provide FREE customer service, including equipment installation, service calls, and employee training. The Model SER-04 is an electric saw suitable for production breaking and...
SEC 180 Circular Breaking Saw
The SEC 180, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for: Pork: ribbing, ham marking, shoulder marking and removing contaminated back bones. Double insulated,...
SEC 180-2 Circular Breaking Saw
The SEC 180-2, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for: Pork: ribbing, ham marking, shoulder marking and removing contaminated back bones. Double insulated,...
SEC 180-3 Circular Breaking Saw
The SEC 180-3, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for: Ribbing, ham marking, shoulder marking, chine bone cutting and removing contaminated back bones....
SEC 180-4 Circular Breaking Saw
The SEC 180-4 applications include: Pork ribbing, ham marking, shoulder marking and removing contaminated back bones. Double insulated electric motor for ultimate performance. Lightweight and flexible – suitable for rail...
SEC 230-2, SEC 280-2 Circular Breaking Saw
The SEC 230-2, with a 3 inch (76 mm) depth of cut, and the SEC 280-2, with a 4 inch (102 mm) depth of cut are ideally suited for: Beef...
SEC 230-4 Circular Breaking Saw
The SEC 230-4, with a 3 inch (76 mm) depth of cut, is ideally suited for: Beef: cutting chucks, shoulders, ribs, forequarters, hindquarters, chine bones, briskets and loins. Sealed, 2.25...
SEC 280-4 Circular Breaking Saw
The SEC 280-04, with a 4 inch (102 mm) depth of cut, is ideally suited for: Beef: cutting chucks, shoulders, ribs, forequarters, hindquarters, chine bones, briskets and loins. Sealed, 2.25...
ECS-1 Electric Circular Saw
The ECS-1, with a 9, 11 or 12 inch (229, 279 or 305 mm) blade, is specifically designed for cutting of beef chucks, shoulders, ribs, forequarters, chine bones, briskets and...
Circular Breaking Saws - Hydraulic
SHC-140 & SHC-165 Circular Breaking Saw
The right or left handed SHC-140, with a 1.5 in (38 mm) cutting depth, or SHC-165 with a 2 in (5 mm) cutting depth are ideally suited for: Beef: Breaking...
SHC-205 Circular Breaking Saw
The right or left handed SHC 205, with a 2.8 in (71 mm) cutting depth, is ideally suited for: Beef: Breaking forequarters and beef plates, also hot and cold ribbing....
1000-FS Circular Breaking Saw
The 1000-FS, with a 3 to 6.0 in (76 to 152 mm) depth of cut, is ideally suited for: Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins and aitch...
HBS-1000 Circular Breaking Saw
The HBS 1000, with a 4.75 inch (121 mm) depth of cut, is ideally suited for: Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins and aitch bones. Pork: chine...
Circular Breaking Saws - Pneumatic
SPC-141 Circular Breaking Saw – Pneumatic
The SPC 141 is ideally suited for opening up mis-split spinal cord cavities in beef. Lightweight and flexible – allows operators to work single handed, both hanging and on the...
SPC-100 Circular Breaking Saw
The SPC 100, with a maximum 0.75 inch (19 mm) cutting depth, is ideally suited for beef and pork scribing. Lightweight and flexible – allows operators to use the tool...
SPC-140 & SPC-165 Circular Breaking Saw
The SPC 140, with a 1.5 in (38 mm) cutting depth, or SPC 165 with a 2 in (51 mm) cutting depth, are ideally suited for: Beef: Breaking forequarters and...
DRS-270 Dual Bladed Ribbing Saw
The Model DRS-270 with two 9 inch (229 mm) blades and a full 2 hp motor for easy, quick and precise beef rib cutting. Lightweight, stainless steel construction – only...
1000F Circular Breaking Saw
The 1000F with a 3 in (76 mm) depth of cut, is ideally suited for: Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins and aitch bones. Large depth of...
MCS-260 Circular Breaking Saw & Dehorner
The Jarvis Model MCS 260 — multi-purpose pneumatically powered breaking saw. The MCS 260 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of...
MCS-300 Circular Breaking Saw
The MCS 300 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of cut is ideally suited for primal cutting of: beef: forequarters, chucks,...
Electric Breaking Saws
SEC 180 Circular Breaking Saw
The SEC 180, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for: Pork: ribbing, ham marking, shoulder marking and removing contaminated back bones. Double insulated,...
SEC 180-2 Circular Breaking Saw
The SEC 180-2, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for: Pork: ribbing, ham marking, shoulder marking and removing contaminated back bones. Double insulated,...
SEC 180-3 Circular Breaking Saw
The SEC 180-3, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for: Ribbing, ham marking, shoulder marking, chine bone cutting and removing contaminated back bones....
SEC 180-4 Circular Breaking Saw
The SEC 180-4 applications include: Pork ribbing, ham marking, shoulder marking and removing contaminated back bones. Double insulated electric motor for ultimate performance. Lightweight and flexible – suitable for rail...
SEC 230-2, SEC 280-2 Circular Breaking Saw
The SEC 230-2, with a 3 inch (76 mm) depth of cut, and the SEC 280-2, with a 4 inch (102 mm) depth of cut are ideally suited for: Beef...
SEC 230-4 Circular Breaking Saw
The SEC 230-4, with a 3 inch (76 mm) depth of cut, is ideally suited for: Beef: cutting chucks, shoulders, ribs, forequarters, hindquarters, chine bones, briskets and loins. Sealed, 2.25...
SEC 280-4 Circular Breaking Saw
The SEC 280-04, with a 4 inch (102 mm) depth of cut, is ideally suited for: Beef: cutting chucks, shoulders, ribs, forequarters, hindquarters, chine bones, briskets and loins. Sealed, 2.25...
ECS-1 Electric Circular Saw
The ECS-1, with a 9, 11 or 12 inch (229, 279 or 305 mm) blade, is specifically designed for cutting of beef chucks, shoulders, ribs, forequarters, chine bones, briskets and...
Reciprocating Breaking Saws
404 (electric), 424 (pneumatic) – Reciprocating Breaking Saw
The Model 404 (electric) and 424 (pneumatic) are lightweight saws suitable for production breaking and general purpose use in locker plants. Lightweight – the Model 404 is 9.8 lbs (4.5...
444 (electric), 464 (pneumatic) – Reciprocating Breaking Saw
The Model 444 (electric) and 464 (pneumatic) are lightweight saws suitable for production breaking and general purpose use in locker plants. Lightweight – the Model 444 is 23 lbs (10.5...
SER-04 – Reciprocating Breaking Saw
Jarvis service technicians are available to provide FREE customer service, including equipment installation, service calls, and employee training. The Model SER-04 is an electric saw suitable for production breaking and...
Knife Sharpening
Hand Knives
Designed by Jarvis, our knives are made from the highest quality blade steel and sharpened in-house by our state of the art Cozzini Primedge sharpeners, guaranteeing precision cutting, safely and...
HE1 Knife Sharpening System
For supermarkets, hardware stores and plants that sharpen 50 knives per day or less. Affordable, compact tabletop unit that combines honing and edging capabilities. Sharpens blades of any length. Easy...
HE2 Knife Sharpening System
All-in-one unit with grinding and honing stones. Unique spiral-shaped honing/edging stones design ensures consistent, smooth, sharp edges. Sharpens blades up to 14″ (356 mm) ong. Recirculating liquid coolant system provides...
HE7 Honer/Edger
Ideal for high-volume knife users. Unique, spiral-shaped honing/edging stone design ensures consistent, smooth, sharp edges. Sharpens blades up to 16” (406 mm) long. Recirculating liquid coolant system provides burn-free and...
HG4CU/HG6CU Hollow Grinder
• Ideal for high-volume knife users. • Available with Ø4” (102 mm) or Ø6” (152 mm) cup stones. • Thins blades for edging up to 16” (406 mm) long. •...
HG4S/HE4 Twins (Small) Sharpening System (Hollow Grinder & Honer/Edger)
Consists of identically sized HG4S Hollow Grinder and HE4 Honer/Edger. System can sharpen up to 400 blades per day. Sharpens blades up to 10” (254mm) long. Unique spiral-shaped honing/edging stone...
Accessories
Hand Knives
Designed by Jarvis, our knives are made from the highest quality blade steel and sharpened in-house by our state of the art Cozzini Primedge sharpeners, guaranteeing precision cutting, safely and...
PC-1 Pizzle Crusher
Crushes sheep pizzles quickly and efficiently. Easy to operate and handle. Designed for operator safety and comfort. Fast, durable and lightweight. Meets national and international requirements for safety and hygiene.
BPH-1 Air Heater
The Jarvis Model BPH-1 applies heat in compressed air lines. Designed specifically for use with all Jarvis pneumatically powered hand tools. Prevents air motor ice-up, eliminating tool down-time. Increases operator...
FV-1 Floor Vacuum Cleaning System
The FV-1 is specifically designed for the removal of blood, meat scraps and saw dust. Lightweight handpiece for optimum operator comfort. All stainless construction for maximum hygiene. High air flow...