Cattle Processing Machinery
SLAUGHTER
Stunning
- USSS-1 Penetrating Stunner
- USSS-2 & USSS-2A
- Non-Penetrating Stunner
Weasand Clip
Stimulator
Horn Removal
- 50-G Dehorner
- 30CL Dehorner
- 50D Dehorner
Hock Cutting
- 30CL Hock Cutter/Dehorner
- 30CL Dehorner
- 50D Dehorner/Hock Cutter
Dehiding
- JC-IIIA Air Dehider
Brisket Opening
- MG-1B Hydraulic Brisket Saw
Hock Cleaning
- MG-1B Hydraulic Brisket Saw
Carcass Splitting
- Buster V
- Buster IX
Spinal Cord Removal
- SHC-165G Spinal Cord Remover
- SPC-165G Spinal Cord Remover
- SSR-1 Spinal Cord Remover
Steam Vaccum System
- CV1
FABRICATION / BREAKING
Quartering / Loin Dropping
- Buster V Loin Dropper
- 50-CL Forequarter Cutter
Pneumatic Saws
- SPC 140/165 Circular Saw
- MCS 180/280/300/310 Circular Saw
Hydraulic Saws
- SHC 140/165/180 Circular Saw
- 1000-FS Circular Saw
Electric Saws
- SEC 180-2 Circular Saw
- SEC 180-3 Circular Saw
- SEC 230-4 Circular Saw
- SEC 280-4 Circular Saw
- SER 200/400 Reciprocating Saw
- SER-03 Reciprocating Breaking Saw
- Cattle
- Slaughter
- Horn Removal
- 50-G Dehorner
50-G Dehorner
Previous
Next
Jarvis Model 50-G:
Electric-hydraulic powered guillotine style dehorner.
- Cuts both horns of all beef closer to the skull than possible with traditional shear type dehorners.
- 1.5 second cycle for high speed production.
- Eliminates difficulties associated with hide pulling over the head.
- Optional clamshell blades yield an even deeper cut, completely under the hom- ideal for the U.S. second cut.
- Best possible hygiene with updated, virtually all stainless steel construction - minimal corrosion problems.
- Robust construction for long trouble-free life.
- Anti-tie down controls for operator safety.
- Meets national and international requirements for safety and hygiene.
Technical Specifications
- Model
- Model 50-G
- Drive:
- Hydraulic
- Cutting Force:
- 9900 lb-f: 44 kN
- Cutting Cycle Time:
- with 4027088 power unit: 1.5 sec
- Cutting Cycle Time:
- with 4027043 power unit: 3.5 sec
Control Handles
- Electric Dual Anti-Tie:
- Down : 12 V
- Blade Opening:
- 5.5 x 6.0 in : 140 x 152 mm
- Overall Length:
- 30 in: 762 mm
- Weight: 65 lbs:
- 29.5 kg
Hydraulic Power Unit
- Motor Power:
- with 4027044 power unit 10 hp: 7457 W
- Motor Power:
- with 4027088 power unit 10 hp: 7457 W
- Motor Power:
- with 4027043 power unit 5 hp : 3728 W
- Operating Voltage:
- 230 / 460 V, 3 phase, 60 Hz : other voltages and 50 Hz
- Hose Length:
- 16 ft : 5 m ft
- Oil Capacity:
- 30 gal : 114 L
- Overall Dimensions:
- 38 x 28 x 33 in : 965 x 711 x 838 mm
- Weight (without oil):
- 380 lbs : 172 kg
